We're sorry, but we couldn't find any products matching ""
Return to Category Search
2 folding swivel seats for comfort and flexibility, Live well and battery compartment, 2 vertical rod holders lure compartments and drink holders, 500lb. maximum capacity, 24Hx61Wx123L"; weighs 151 lbs. Read More
Flush mount black pole holder attaches to stanchions or railings! Holds poles 7/8" - 1 3/8" Pair. flags Read More
12 multipurpose recreation watercraft, Reinforced bench seats for 2 adults, Builtin motor mount on transom; vertical rod holders, 420lb. maximum capacity, 17Hx48Wx144L"; weighs 133 lbs. Read More
Features sturdy 1 ?" diameter anodized aluminum tubing. Comfortable seating of marine grade UV resistant vinyl. Room to stow a 72QT Igloo cooler underneath, which is a great space saver! Measures 49" H x 38" W x 25" D. Model WD1012. Sh Wt. 60 lbs. Boat & Pilot Seats Read More
The Multi-Lok holder has six angle settings for anodized, rust- and corrosion-resistant aluminum rod holder. A special polishing system makes them as good looking as they are functional. Movable holders have a Pin-Lok function, which allows them to rotate 360° on mount, then lock securely. Rubber coating at contact points protects your rods. The Multi-Lok holder comes with a mounting plate. Tube is 2" x 10-3/4" tube. Boat Rod Holders Read More
This marine-grade, corrosion-resistant, clamp-on Rod Holder is constructed from 316 stainless steel. It's a clamp-on model that fits 3/4'' to 1'' schedule-40 pipe found on most T-top outer rings. The patented 35° drop-down feature affords easy access to your fishing rod on even the tallest T-top. Turn-and-Lock ability lets you position the holder for your desired fishing angle. Boat rod holders Read More
Injection-molded, UV-inhibiting, high-density polyethylene rod holders have a deep slot to allow locking in most conventional rods and reels, eliminating rattle. Deluxe model includes holders for any popular style of fishing pliers and knives, plus it has extra holes for ice picks and other narrow tools. 12" high with 1-11/16" hole diameters. Made in USA. Colors: Black, White. Models: Six-Rod Rack, 24" wide Three-Rod Rack, 12" wide Individual Tube Rod Holder Deluxe Four-Rod Rack, 18" wide Standard Four-Rod Rack, 18" wide Single rod tube with suction cups Boat Rod Holders Read More
This rail-mount rod holder fits 7/8"-1" rails. It easily adjusts to any angle up and down, side to side. All parts are constructed of marine-grade stainless steel to prevent rust and corrosion. The mounting hardware is included. The inside of rod holder is coated with a special no-scratch lining to protect your rod and reel. No other parts needed. Per each. Buy two and SAVE $1.50 each. Boat Rod Holders Read More
Increase your trolling spread and catch more fish with this polished stainless steel outrigger rod holder. Includes an integrally cast gimbal pin and white vinyl liner to protect rods. A heavy 48" nylon safety strap allows you to fight a fish without unlatching. For use in standard metal gunwale rod holders. Colors: Gold or Silver. Boat Rod Holders Read More
Constructed of strong investment-cast 316 stainless steel for maximum corrosion resistance and long life. White vinyl liner and integrally-cast gimbal pin. Clamp insulator protects anodized finish of rails. Standard mounting clamp rotates for either vertical or horizontal mounting. Fits 7/8" to 1-1/16" o.d. rails. Colors: Silver, Gold. Boat Rod Holders Read More
White replacement holders for Trac-A-Rod rod holder system. 3 pairs per set. downriggers/outriggers Read More
Whitecap Marine Fishing Equipment And Accessories Maufacture Whitecap, Part Number S-1957PP Please Be Carefull When Ordering Some Items May Share The Same Image For Similar Products Read More
These innovative clamp-on rod holders have recessed screws with stylish clamps. Designed for the discriminating boat owner who wants only the best. Mounts to most tuna towers, T-tops, learning posts, radar arches and poling platforms. Available: 3/4''- to 1'' IPS pipe 1-1/4'' to 1-1/2'' IPS pipe. Color: Polished Silver. Boat rod holders Read More
An affordable aluminum rod holder for 1-1/4" square tube commonly found on pontoon boats. Uniquely designed, it has an anodized aluminum flared rod holder that sits perfectly in a black plastic holster clamp. It clamps on the railing at a 15(degree font) trolling angle. Comes in a Satin finish. boating-rail-hardware Read More
Complete with 30" fixed pedestal with 9" diameter base, 2 rod holders and open storage compartment. Pedestal can be cut down to accommodate Captains height. Model WD439. Sh. Wt. 30 lbs. Boat & Pilot Seats Read More
Investment-cast 316 stainless steel rod holder sports a sleek, swept-back look with the holder body angled at 20 (degree font). Designed to be attached to the boat's transom and used for fishing or rod storage. May be mounted vertically or at any angle to serve as a rod rigger. Has a heavy vinyl liner and integrally-cast gimbal pin. boating-rail-hardware Read More
Designed for fishing two rods off the same downrigger. The post fits into the standard tube clamp that comes with most Cannon downriggers. The angle of each holder can be adjusted separately. All parts are made of lightweight, corrosion-resistant materials. Read More
Designed by fishermen for fishermen, the RodBuckle? is the most attractive and functional rod hold-down system on the market for deckstyle boats. The self-extracting, 1.5" polyester web extends a full 24" and securely locks into position on the deck. The PVC extrusion coated strap grips rods and resists hook penetration. Easy installation with mounting template. Also available for mounting inside the gunwale is the Concealed Mounting Kit and the Top Deck Housing Adapter for mounting on deck to avoid cutting into gunwale Read More
Pre-drilled models available for Grand Slam,,,Sport Slam or non-drilled for mounting lights, radars and antennas. Recessed screws allow the clamp to capture both,,the T-Top pipe and the special mounting plate. 30"x5" includes mounting for 3/4" and 1" round and 3/4" oval pipe. Read More
Change your rod holder configuration whenever you choose with this unique patented clamping system. Each rod holder's mounting clamp rotates for either vertical or horizontal attachment. Strong investment-cast 316 stainless steel offers maximum corrosion resistance for long life. Choose from sleek, swept-back styled top or mid mount models with mirror polished silver or gold titanium nitride finish. Top mount version clamps out of the way above a T-top rail allowing space for more rods. All models include an strong integrally-cast gimbal pin. Models for 1" and 1-1/4" aluminum pipe include a clamp insulator to protect anodized finish of rails. Read More
Made of 100 Percent 316 stainless steel, these flush mount in-gunnel rod holders feature an extra large, low profile cap which enhances the appearance of any boat. They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of down riggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place.Features rounded cast bottom end with a 1/2" pipe threaded drain for use in areas where dry storage beneath rod holder is required. Accepts large rods with a tube depth of 10-1/2" ,and I.D. of 1-7/8" rod holders/racks Read More
