We're sorry, but we couldn't find any products matching ""
Return to Category Search
Senco SHF15 Manual Hardwood Flooring Nailer The SENCO? SHF15's ratchet system gives do-it-yourself rentalnovice and professional floor installers a multiple-hit tool with amplepower to set nails. Nails not fully driven by the first blow remainpositively positioned for additional strikes. It has a rugged compositebase that virtually eliminates scratching and damage to the surface ofboth unfinished and prefinished wood. And at only 7.6 lb the SHF15 isergonomically designed with the hardwood installer in mind.? Mallet-actuated firing simultaneously sets floor boards (tongue intogroove) and drives cleat nails at an ideal 45?angle? Unlike staples cleat nails minimize wood splitting and still allow forexpansion and contraction of flooring materials.? Easy-to-use ratchet drive system allows cleats to be driven withmultiple blows? Lightweight - only 7.6 lb? Composite base reduces scratching and surface damage? Mallet actuated (mallet included)? Ergonomically designed for improved productivity Read More
RIDGID 1/2"-2" Model 12-R Pipe Threader Set - 36475 1/2"-2" Model 12-R Pipe Threader Set Features Die heads lock onto handle ratchet and handle assembly Heads are easily removed when ratchet knob is pulled out Set includes 6 dies, heads, ratchet, and handle Specifications Capcity: 1/2" - 2" (12-50mm) Weight: 34-3/4 lbs. (15.8kg) Model: 36475 Hardware Tools Hand Tools Plumbing Tools Pipe Threaders RIDGID Pipe Threaders Read More
Greenlee 766 Hand Crank Wire Puller ? Pull up to 1500 lbs. (6.7 kN) with only 30 lbs. (133 N) of crank handle force.? Two-speed ratchet winder for fast efficient operation.? Has 200' (61 m) of steel aircraft cable.? Completely self-contained and ready to operate.SPECIFICATIONSPulling Force: Maximum - 1500 lbs. (6.6 kN) Size: 200' (61 m) pulling cable length Weight: 38 lbs. (17.2 kg) Power: Manual - 2 Speed Hand Crank Dimensions: Length - 52" (1.32 m) Width - 18" (457 mm) Height - 10" (254 mm) Read More
CV joint boot clamp wrench securely fastens band-it style free-end clamps, roll band clips and pre-formed CV boot clamps Use by turning the winding mandrel with a 1/2-inch socket or wrench Measures 11-1/2 inches long Lifetime warranty, Manufacturer: KD Tools Read More
This ratchet-action bit brace features ball bearing movement, nickel-plated metal parts, wood head, center grip with 3 steel jaws, and 10" sweep. LMW. Made in China. Home Improvement,Tools,Hand Tools Read More
Features TorqueSetting Adjustment Requires Only Fingertip Force No Need To Wind Down The Wrench After Use All American Steel Construction Extremely Durable 4 Accurate Guaranteed against defect in workmanship and materials for 1 year from the date of delivery providing that they have been used according to instructions Specs Drive Type Flex Ratchet Capacity 40250 lbft Grad Steps 5 lbft Effective Length 19 Width 158 Weight 339 lbs Finish Nickel Chrome Ratchet Service Kit R33BFRK Read More
For reaching hard-to-get-at screws, the ratchet offset screwdriver is used, especially where leverage is required. The ratchet drive reverses instantly for clockwise or counterclockwise rotation. The blades are made of machined ground and hardened tool steel. Recessed head screws, which are used extensively on office machines and in machine shops, usually have a hex-shaped (six-sided) recess. To remove or tighten this type screw requires a special wrench that will fit in the recess. This wrench is also called a hex wrench. Read More
Rating:
(1 Review)
Wheeler Rex 89250 Stainless Clamp Pincher Ratchet Tool The Wheeler Rex PEX Stainless Clamp Pincher Ratchet Tool with a full cycle mechanism assures consistent water tight crimps, eliminating the need for a crimp gauge. Made from heat treated steel for strength and durability. It's compact design and lightweight frame allow this tool to be extremely versatile when used in confined areas. Wheeler Rex 89250 Stainless Clamp Pincher Ratchet Tool Features: Ratchet Tool can be used for 3/8", 1/2", 3/4" and 1" Clamps Crimps conform to ASTM F2098 specifications Overall length 11" inches Can used on: Watts WaterPEX Cinch style Zurn PEX Stainless Steel Crimp Rings Oetiker Clamps RTI Plumb-PEX Clamp Read More
1/2" Impact Wrench with 250 ft. lbs. of torque for quick removal of stubborn bolts and nuts. 3/8" Ratchet with 50 ft. lbs. of torque to remove and install nuts, bolts and spark plugs quickly. Air Hammer with 1 5/8" stroke provides the power for cutting, chipping and scraping., Weight: 31.5 lbs., Manufacturer: Campbell Hausfeld Read More
0 1/2" Impact wrench 230 ft./lbs., maximum torque, 7000 RPM, 8 sockets 3/8" ratchet, 50 ft./lbs., maximum torque, 150 rpm Air Hammer, .401 Shank Diameter, 1 5/8" Stroke, 4,500 Blows Per Minute, 3 Chisels Included Die Grinder, 22,000 rpm, safety trigger, 1/4" collet, Weight: 20.18 lbs., Manufacturer: DeVilbiss Air Power Read More
• Technologically advanced head design for extra durability.• Up to 50 ft-lbs. torque, 160 RPM free speed• Variable speed lever style throttle• One year limited warrantySpecifications:• Torque range: 10-45 ft.-lbs. (14-61Nm)• Max. torque: 50 ft.-lbs. (68 Nm)• Free speed: 160 RPM• Standard bolt cap: 3/8" (10 mm)• Net weight: 2.5 lbs. (1.13 kg)• Overall length 10.5 in. (267 mm)• Average air consumption: 4 cfm (112 l/min)• @load: 18 CFM (504 l/min.)• Sound (pressure/power): 92.5/105.5 dBA• Air inlet: 1/4", , IR 1077XPA, IRC-1077XPA Read More
Reaction Time 1/3,600-seconds Solar Non-Replaceable Battery Meets ANSI Z87.1-2003 Standards, Manufacturer: Hobart Read More
The BOLT-GRIP fastener remover is designed to work with multiple drive options including ratchets, impact wrenches, flat wrenches, and VISE-GRIP locking pliers. A unique reverse spiral flute design securely grips and removes stubborn nuts and bolts. In addition to this 5-piece base set, IRWIN offers a 5-piece Expansion Set to address a complete range of fastener sizes. In addition, the pieces in the expansion set can be conveniently housed in the base set case. Tools and Hardware Read More
Circle cutter Uses RB18-2 and PRB18-2 blades Ratchet mechanism, blade cover, Weight: 3 lbs., Manufacturer: Olfa Products Read More
Easily Installs New Wheel Studs. Use with a ratchet or impact wrench to pull the new stud securely in place. Position the tool over the stud shaft. Tighten the lug nut against the tool to pull the stud in place. Works on most all automovive and light-duty truck wheel studs, foreign and domestic. NOTE: The bearing will wear use and is not warrented. Read More
The Oatey Washing Machine Outlet Box # 38540. Patented, versatile design allows for right, left, or center drain and bottom or top mount valves. "Lock and Load" valve mounting system for quick and easy positioning. Single lever valve mounting hub locks into position in seconds. Unique, easily installed and removed test cap that does not fall into drain. Copper Sweat Connections Water Hammer Style Ball Valves 2" Waste Outlet Read More
Greenlee 45207 Performance Ratchet Cable Cutter ? Simple one-hand operation.? Two-speed ratchet mechanism adjusts for light/heavy cutting.? Well-suited for tight work spaces.? Specially designed blade improves cutting capacity.SPECIFICATIONSMaximum Capacity - Copper: 750 kcmil (MCM) (400 mm2)Maximum Capacity - Aluminum: 1000 kcmil (MCM) (500 mm2)Maximum Capacity - Communications Cable: 2" (50 mm) dia.Frequent Use Capacity - Copper: 600 kcmil (MCM) (300 mm2)Frequent Use Capacity - Aluminum: 750 kcmil (MCM) (400 mm2)Length: 11" (279 mm)Jaw Opening: 2" (50 mm)Weight: 2.4 lbs. (1.1 kg) Read More
Comprehensive and reliable 35-piece 1/4-inch, 3/8-inch, and 1/2-inch drive Torx bit superset Patented SuperKrome finish for durability and maximum corrosion resistance Convenient through-hole design for easy bit replacement Made in the U.S.A. Plastic storage case, Weight: 5 lbs., Manufacturer: SK Handtools Read More
Ridgid 31330 Model C-36 Heavy-Duty Chain Wrench A double jaw gives fast ratchet-like action in either direction. The heavy-dutymodel has replaceable alloy steel jaws. The light-duty model has a one-pieceforged alloy steel handle and jaw. Ideal for use in close quarters.Rated Pipe Capacity: 4-1/2" Actual O.D. Capacity: 7-1/2" Chain Length: 29" Read More
Wheeler Rex 5290 Plastic Pipe Cutter Wheeler Rex 5290 Plastic Pipe Cutter Specifications: For 1/8" to 1 1/2" O.D. (3-37mm) Schedule 40 Materials: PVC, and ABS, vinyl, poly pipe and tubing. Ratchet style. The replacement blade is 5300. For quick cuts on plastic pipe and tubing. Read More
Greenlee 796 Ratchet Cable Bender ? Simplifies and speeds cable installation. ? 10" (254 mm) ratchet extension is furnished to simplify bending in deep enclosures.? Includes ratchet wrench L-wrench ratchet extension bending shoe assembly and storage box.SPECIFICATIONSCapacity: Up through 500 kcmil (MCM) (240 mm2) 600 volt copper or aluminum cableWeight: 8.2 lbs. (3.7 kg) Read More
Ridgid 31325 Model C-24 Heavy-Duty Chain Wrench A double jaw gives fast ratchet-like action in either direction. The heavy-dutymodel has replaceable alloy steel jaws. The light-duty model has a one-pieceforged alloy steel handle and jaw. Ideal for use in close quarters.Rated Pipe Capacity: 3" Actual O.D. Capacity: 5" Chain Length: 20-1/4" Read More
4.8 CFM 90 PSI Torque Specs Up to 50 foot pounds of torque Perfect Jobs Remove and install nuts, bolts and sparkplugs in light duty engine and exhaust work Ball Socket Retainer Provides fast and easy socket replacement Quickly Change Direction Forward / reverse lever located behind the ratchet head Read More
Oil Filter Wrench - 3 Jaw - Oil Filter Wrenches Patented 3 jaw oil filter wrench grips when others wont! Use oil filter wrench with 1/2" square drive (Ratchet extension etc.) or other wrench. Allows much better access to tight spaces. Oil filter wrench removes all oil filters from 2 1/2" to 4" in diameter. Shipping weight - 2 lbs. Read More
Rapid Reverse Ratchet, Jaw Capacity 1/4 To 7/8, 60 Tooth Ratcheting Mechanism Gives Speed & Fluid Feel, The Handle Is Ergonomically Oversized. Easy To Use Adjustment Dial. Read More
Brand New Ridgid Replacement Teeth Alloy material Nominal Pipe size 1/2" Pipe dies for OO-R, 111-R 12-R, O-R, 11-R Ratchet threaders or 30A, 31A 3-way pipe threaders. (NPT) National Pipe Taper. Read More
